广告详情
05/2023返回
Rib Lath Girder Boxes of Galvanized Steel Expanded Metal Sheet

Rib Lath Girder Boxes of Galvanized Steel Expanded Metal Sheet

21 Xincheng Street, Dezhou, China – ??? – 中国, 渤海湾+86-534-2328351Facebook
Twitter
http://www.weldedmeshfence.com
起始
???.
目的地
欧洲联盟.
50 Crossings是一切
??? (中国, 渤海湾) - 杜布羅夫尼克 (克罗地亚)??? (中国, 渤海湾) - 布尔诺 (捷克共和国)
??? (中国, 渤海湾) - 布尔加斯 (保加利亚)??? (中国, 渤海湾) - 格拉茨 (奥地利)
??? (中国, 渤海湾) - 奥尔堡 (丹麦)??? (中国, 渤海湾) - 安德莱赫特 (比利时)
??? (中国, 渤海湾) - 利马索尔区 (塞浦路斯)
描述

We supply expanded steel rib lath box girders, in various widths, rib heights and rib spacings, available in stainless or galvanised steel.

Galvanized steel zinc plated rib lath box girder is processed from coils of sheet steel. The sheet is slit and expanded into a herring bone pattern with metal ribs running about every 3 inches on the long direction of the sheet. This product is typically stapled, nailed or screw applied to the substrate. It can also be tie wire attached to cold rolled grillage. Expanded metal lath has diamond shaped openings made in a similar manner as rib lath but without the ribs. It too is attached with staples, nails screws or tie wire. Regardless of the lath being used, weather-resistant barrier paper should be omitted on ceilings and soffits. Strips of paper may be installed to minimize blow-by from a gun-applied scratch coat. These strips do not hold back water in the ceiling. While these strips of paper make it harder to tie wire the lath to the grillage, it is possible.

The flat and 3/8” galvanised iron rib lathing is designed for framing in various building constructions. According to table 3 of ASTM standard C 1063, expanded metal steel lath is approved for use on the underside of horizontal surfaces with framing supports spaced up to 16” on center.

About the company

ZhongCheng WELDED MESH CO.

Activity: ZhongCheng WELDED MESH CO.

商業
聯盟
Referral Link
公司簡介
發送消息
按照用戶
媒体文件
Rib Lath Girder Boxes of Galvanized Steel Expanded Metal Sheet
建议
新評論
发送